Appearance
Shop-floor terminal
ManufacturingShop-floor terminalPermission:
manufacturing.terminal.useormanufacturing.work_order.executeOpen in Roari ERP (new tab)Also known as
- operator
- scan
- barcode
- start
- stop
- shop floor
- MES
- operator terminal
- clock on
- clock off
The terminal is a big-button page for operators at a workstation or on a tablet: pick or scan an operation, start and stop the clock, and report good and scrap quantities. The hours you book are costed into the work order.
Pick your operation
- Open ManufacturingShop-floor terminal.
- Choose your Work centre to see only its queue (All work centres shows every one).
- Either select an operation in the Queue, or scan the code from the work order traveller into Scan or type WO-2026-00012/20 and select Find. A work order number alone opens its current operation;
WO…/20opens operation 20.
The queue lists ready, running and paused operations first, then pending ones, in schedule order. Each card shows the work order, operation, item, … of … done and the due date. Quality hold marks an operation waiting for a quality decision.
Run an operation with the clock
- With the operation open, select Start. Running for … counts the time.
- When you stop (end of shift, break, job done) select Stop.
- In Stop and report, enter the Good quantity and Scrap quantity made since you started, and turn on Complete the operation if it is finished.
- Select Stop and report.
The message Operation … stopped and reported. appears. The hours are booked as labour and overhead into WIP; backflushed materials of the operation are issued up to the good quantity. Completing the operation makes the next one ready.
Report without the clock
- Select Report without timer.
- Enter the Good quantity, Scrap quantity, Setup minutes and Run minutes, and optionally Complete the operation.
- Select Report.
Receive the finished output
On the last operation the page says Last operation: receive the finished output when you are done.
- Select Receive output.
- Enter the Quantity, the lot or serial numbers if asked, and select Receive into stock.
See Work order for the fields and the posting.
Posts when you stop or report hours
| Account | Debit | Credit |
|---|---|---|
| WIP | ✓ | |
| Labour absorbed into production | ✓ | |
| WIP | ✓ | |
| Overhead absorbed into production | ✓ |
Backflushed materials post Dr WIP / Cr Inventory.
When you cannot start
| What you see | Why |
|---|---|
| An earlier operation is on quality hold. Work can resume once quality releases it. | An inspection on an earlier operation is pending, rejected or set to rework. Ask quality (Quality hold). |
| This operation is waiting for a quality decision. | This operation's own in-process inspection is open. |
| Start is disabled | The operation is completed or subcontracted, or you lack the permission. |
| Nothing found for … | The scanned code is not an open work order or operation. |
Differences by role
- Operators need Permission:
manufacturing.terminal.useor Permission:manufacturing.work_order.execute. The terminal books time for the signed-in user, so each operator signs in as themselves.
Related
- Work order
- Schedule: the order the queue follows
- Inspections
- Quality hold
- Plan to produce
- Keyboard shortcuts
