Appearance
Work order
ManufacturingWork ordersWork orderPermission:
manufacturing.work_order.viewAlso known as
- WO
- production order
- job card
- release
- material issue
- backflush
- report operation
- receive output
- complete work order
- production variance
The work order page is where production happens on paper: you release the order, issue materials, report operations, receive the finished output and complete it. It also shows what the order has cost so far and every posting it made.
The header shows the number, status, item, quantity, warehouse and due date, with Print traveller (a PDF with the materials, the operations and a scan code per operation for the terminal). A yellow banner says Due on … and not finished. when the order is late.
Statuses
| Status | Meaning | What you can do next |
|---|---|---|
| Planned | Created. Every field can change. | Release or Cancel order. |
| Released | On the shop floor. The first operation is Ready; materials are reserved as far as stock allows. | Issue, report, receive output, Cancel order. |
| In progress | The first issue, operation start or report, or output receipt moved it here. | Continue; Complete once output is received. |
| Completed | Open operations closed, reservations released, variance posted. Completes on its own when the produced quantity reaches the planned quantity. | Close. |
| Closed | Locked for good. | Read-only. |
| Cancelled | Cancelled with a reason, shown in a banner. | Read-only. |
After release only the priority, due date, lot and notes can change. An order with materials issued or output received cannot be cancelled. See Documents and their states.
Release a work order
- Open a Planned work order.
- Select Release (needs Permission:
manufacturing.work_order.release).
The message WO-… released to the shop floor. appears. The first operation becomes Ready and the materials are reserved in the warehouse when Reserve materials when a work order is released is on (Production settings). Shortages are listed in the activity log.
Issue materials
The Materials tab lists each component with Required, Issued, Available, Reserved, the Std unit cost, the Op it is consumed at and whether it is issued by Backflush or Manual. Components that come through a phantom sub-assembly show Via ….
To issue everything still outstanding:
- Select Issue remaining materials (needs Permission:
manufacturing.work_order.issue).
To issue one material, a different quantity, a specific lot or serials:
- Select Issue material.
- Pick the Material, enter the Quantity, and optionally a Lot (optional) (default: First expiring lot) or Serial numbers (left empty, serials are picked automatically).
- Select Issue.
The issues appear under Issues with their kind (Manual issue, Backflush, Subcontract shipment) and lots or serials. Backflushed materials are issued for you when an operation is reported or output is received.
Posts on every material issue (manual or backflush)
| Account | Debit | Credit |
|---|---|---|
| WIP (work in progress) | ✓ | |
| Inventory | ✓ |
Report an operation
The Operations tab shows each routing operation with its work centre, Planned h, Actual h, Good, Scrap, Labour + overhead and Scheduled window, and below them the Time bookings.
- On a Ready or In progress operation, select Report (needsPermission:
manufacturing.work_order.executeormanufacturing.terminal.use). - Enter the Good quantity and Scrap quantity, and the Setup minutes and Run minutes worked.
- Turn on Complete the operation when it is finished.
- Select Report.
Completing an operation makes the next one Ready. With Complete an operation when its quantity is reported in full on, it completes by itself once good plus scrap reaches the order quantity. Reopen puts a completed operation back to Paused. Operators usually report from the Shop-floor terminal instead, with a running clock.
Posts when hours are booked (report, or stop on the terminal)
| Account | Debit | Credit |
|---|---|---|
| WIP | ✓ | |
| Labour absorbed into production (hours × work centre labour rate) | ✓ | |
| WIP | ✓ | |
| Overhead absorbed into production (per hour, or % of labour) | ✓ |
Quality hold
Operations flagged for inspection on the routing request an in-process inspection from Quality when they are reported. Until quality accepts it, the operation shows Quality hold (and Inspection … with the inspection status). When Block work after an operation on quality hold is on, later operations cannot start or be reported and output cannot be received ("Operation … is on quality hold"). See Quality hold and Inspections.
Subcontracted operations
An operation marked Subcontract on the routing is done by a vendor (needs
Permission:manufacturing.subcontract.manage and the Procurement module):- Select Create subcontract PO, pick the Subcontractor, check the Unit price and Expected back date, and leave Ship components on to send the operation's materials now. Confirm. A purchase order is raised (Purchase order … raised.).
- If you did not ship with the PO, select Ship components later. An inventory shipment to the vendor is made.
- When the processed items come back, select Receive processed, enter the Quantity and confirm. The operation completes when the whole quantity is back.
Subcontracting postings
| Event | Debit | Credit |
|---|---|---|
| Component shipment to the subcontractor | WIP | Inventory |
| Receipt of processed items (at the PO price) | WIP | GRNI (cleared by the vendor bill) |
Receive output
- Open the Output tab and select Receive output (needsPermission:
manufacturing.work_order.receiveormanufacturing.terminal.use). - Enter the Quantity received into stock.
- For lot-tracked items check the Lot; for serial items enter Serial numbers (optional) or leave them empty to generate them from the work order number (
WO-2026-00012-001…). - Leave Complete the work order after this receipt on if this is the last receipt.
- Select Receive into stock.
Materials not tied to an operation are backflushed, the item is received at its standard unit cost and any by-products at their cost share. The receipt is listed under Output receipts.
Posts on output receipt
| Account | Debit | Credit |
|---|---|---|
| Inventory (finished goods and by-products, at standard) | ✓ | |
| WIP | ✓ |
Complete and close
- Select Complete (appears once something has been produced; needsPermission:
manufacturing.work_order.complete). - Read the confirmation: open operations are closed, reservations released and the residual WIP is posted as the production variance. Select Complete.
- Later, select Close to lock the order.
Posts at completion: the residual WIP of the order
| Account | Debit | Credit |
|---|---|---|
| Manufacturing variances (unfavourable) | ✓ | |
| WIP | ✓ |
A favourable variance posts the other way round. Variance = actual material + labour + overhead + subcontract − output at standard. The accounts come from Account mapping.
Read the costs
The Costs tab compares Standard with Actual for Material, Labour, Overhead and Subcontract, shows the Standard unit cost, Actual unit cost, Output value, WIP, Hours planned / actual and the Variance (posted). Postings lists the labour, overhead, subcontract and variance entries, each linked to its journal entry.
Cancel a work order
- Select Cancel order (needs Permission:
manufacturing.work_order.cancel). - Enter a Reason and select Cancel order. Reservations and scheduled capacity are released.
When an action is refused
| Message | What it means |
|---|---|
| Operation 10 Upholster seat and back is on quality hold (inspection pending) | An earlier operation waits for a quality decision. |
| Receive output before completing the work order | Nothing has been produced yet. |
| Materials were issued or output received; complete the work order instead of cancelling it | The order has activity and cannot be cancelled. |
| Insufficient stock / lot required / serial required | Inventory refused the issue; see Stock. |
| Account mapping missing / period closed | Finance refused the posting; ask finance to map the account or open the period. |
Differences by role
- Warehouse holds every work order permission in the demo company. Buttons you lack thepermission for are disabled with the permission name in the tooltip.
- Operators with only Permission:
manufacturing.terminal.usecan issue, report and receive, but not release, complete or cancel.
